ESTUDIO REOMÉTRICO DE LA REVERSIBILIDAD Y LOS TIEMPOS DE FRAGUADO EN CEMENTOS PORTLAND Y PUZOLÁNICOS

Autores/as

  • Lenin Abatta Universidad de Fuerzas Armadas ESPE
  • Christian Narváez Universidad de Fuerzas Armadas ESPE
  • Luis Carrión Universidad de Fuerzas Armadas ESPE
  • Reinaldo Delgado Universidad de Fuerzas Armadas ESPE
  • Alexander Ibarra Universidad de Fuerzas Armadas ESPE

DOI:

https://doi.org/10.24133/EMIF.V4.3i.3944

Resumen

 Considerar el hormigón fresco como un fluido no 
newtoniano es una manera muy útil de conseguir 
avances en el campo de la ingeniería. El presente 
artículo presenta una comparación, utilizando 
métodos reométricos, de la reversibilidad y el 
tiempo de fraguado de un cemento Portland 
español y un cemento Puzolánico ecuatoriano 
Lafarge. Los resultados apuntan a una diferencia 
en los tiempos de fraguado.

Palabras Clave: Hormigón, fluido no newtoniano, 
reología, cemento.

ABSTRACT
 Consider the fresh concrete as a non-Newtonian 
fluid is a useful way to make progress in the field 
of engineering. This article presents a comparison, 
using rheometric methods of reversibility and 
the setting times, of a Spanish Portland cement 
and Lafarge pozzolan cement from Ecuador. The 
results show  a difference in the setting times.

Keywords: concrete, non-Newtonian fluid, 
rheology, cement

REFERENCIAS
 [1] Farris RJ. Prediction of the viscosity of multi 
modal suspensions from viscosity data. 
Transactions of the society of rheology 12 
(1968) 281–301.
 [2] Ferraris C. Concrete Rheology: What is it and 
why do we need it. Proc. of the 1st Int. Symp. 
On Design, Performance and Use of SCC – 
SCC’2005. China, May 26-28 2005, Changsha, 
Hunan, China pp. 229-236.
 [3] Hossain K.M.A. Properties of volcanic pumice 
based cement and lightweight concrete. Cement 
and Concrete Research 34 (2004) 283-291.
 [4] Hossain K.M.A. Chloride induced corrosion 
of reinforcement in volcanic ash and pumice 
based blended concrete. Cement & Concrete 
Composites 27 (2005) 381-390..
 [5] Rubio-Hernández F.J., Cerezo-Aizpún I., 
Velázquez-Navarro J.F. Mineral additives 
geometry influence in cement pastes flow. 
Advances in Cement Research 23 (2011) 55
60.
 [6] Rubio-Hernández F.J., Morales-Alcalde J.M., 
Gómez-Merino A.I. Limestone filler/cement 
ratio effect on the flow behavior of a SCC 
cement paste. Advances in Cement Research 
25 (2013) 262-272.

Descargas

Publicado

2018-12-18